Radiators Tenrad

A feature of Tenrad radiators is the technology used in the design of setting guide ribs at a small angle, due to which there is an increase in convection flow. This significantly increases the efficiency of use of the device and allows its use in low-temperature heating systems. The company produces both aluminum and bimetal models of radiators. Production is located in China, but the production uses German, Italian and Swiss equipment. You can learn more about Tenrad radiators from the reviews available on this page.

Radiators Tenrad

ANDREW

Radiator Tenrad

A comment

I always take it, only, saving bimetal on 500 rubles is ridiculous, especially at the dachas, even if the ladies boil the system or the pressure breaks it will not break. I take bimetal TENRAD or Raden. Do not sin on aluminum, take cardboard radiators), if you do not see the difference with steel and duralumin.

pros

Normal if taken from a dealer.

Minuses

Bimetal has no minuses.

Term of use

less than a month

Recommendation to others

Difficult to answer

Quality
5/5
Practicality
5/5
Price
5/5

Alice

Tenrad Radiators - China Disguised as Germany

A comment

My husband and I had long planned to equip the cottage for living in the winter. The house is capital, but there was really no heating. We decided to install a boiler and radiators. They didn’t stint on the brand of the boiler, but decided to save on radiators - they took the AL500 Tenrad, compatible with the boiler. How we regretted it!

In two of the three radiators purchased, vertical tubes burst during the first week of operation (as the seller explained, when they showed a breakdown, the material could not withstand a pressure of 12 atm). It turned out that they were not even made of aluminum, but of an incomprehensible soft alloy.

They even wanted to sue the store that sold them to us, but they quickly, adequately provided a replacement for all three radiators (in the end, we installed Rifar, because we no longer trusted this brand), installed them and we calmed down. And the house was not badly damaged as a result. I am glad that it became clear at the very beginning of operation and the issue was quickly resolved. I do not advise anyone these radiators!

pros

price

Minuses

not even minimal pressure, terrible quality

Term of use

more than one year

Recommendation to others

Not recommend

Quality
1/5
Practicality
1/5
Price
4/5

Semen

TENRAD radiators - heating season without problems

A comment

Last summer, I bought an apartment on the secondary market, which was completely killed; there has been no repair since the house was commissioned (25 years). The radiators were cast iron, as they warmed I can’t say since we completed the repair by the heating season. We installed TENRAD bimetallic radiators, 8 sections in the kitchen, and 10 sections in the rooms. Installation was easy, the guys that did the repair before take off did not encounter, but were satisfied. The whole season was warm, despite the fact that we like to air often. They look very good, fit into any interior at a time. In addition, the wife is pleased that they are easy to clean, and dust does not accumulate inside, as in cast-iron.

I think that the radiators at their price are just excellent, but how much quality coverage will show time, while they look like from a store.

pros

heat transfer, appearance, price

Minuses

not found

Term of use

more than one year

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
4/5

Anton

Radiators aluminum TENRAD 350/100

A comment

We purchased Tenrad 350/100 aluminum sectional radiators. When buying, they explained to me that these radiators are made of high-strength aluminum alloy under pressure and are used for water heating. Arranged an affordable price.

We use radiators for the second heating season. Impressions, only good - the room is very warm, cozy and beautiful. The radiator itself looks neat and compact, white. The main thing is that due to the location of the inclined side ribs, an effective diffuse air flow is created, increasing the heat transfer coefficient, even with low-temperature fluid supply.

Tenrad radiator does not require additional maintenance. The color does not fade, since the enamel is applied by anaphoresis, a two-layer coating of enamel made of epoxy polyester.

pros

service life up to 50 years, permissible temperature up to 120 degrees, low cost.

Minuses

Only use a high-quality coolant with a specific pH.

Term of use

more than three years

Recommendation to others

Difficult to answer