Radiators Teploterm

BAZ OJSC (Bologovsky Valve Plant) produces aluminum and bimetal heating radiators Teploterm. Teplotherm radiators are manufactured by injection molding. Bimetallic models are ideal for use in Russian conditions, because they are not afraid of hydraulic shocks and chemical influences of coolants. They can be used in rooms of various purposes. The entire surface of the radiator is covered with a special anti-corrosion solution, which allows the device to serve properly for many years. Of great importance are the innovative technologies used in the production process, which, according to experts, make Teploterm radiators safe, with a high degree of heat transfer and durability.

Radiators Teploterm

Radiators Teploterm
A comment
He put in one room 2 batteries of 10 sections in a house with stove heating. 5 years until the problems were warm perfectly. I don’t know what will happen next, I think it would be necessary to rinse already.
pros
comfortable aesthetic good heat dissipation
Minuses
Not yet
Term of use
more than five years
Recommendation to others
Recommend
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    4/5
Show more
I do not recommend Teploterm radiators
A comment
complete shit
pros
no pluses
Minuses
stood 3 seasons and flowed
Term of use
more than three years
Recommendation to others
Not recommend
  • Quality
    1/5
  • Practicality
    1/5
  • Price
    1/5
Show more
Radiator Teploterm 500/80 is clearly not for the apartment
A comment
I bought radiators from this series at the beginning of summer the year before last, completely replaced the heating system in the apartment. And already this year, at the end of the heating season, two radiators began to pass water in the area of ​​fittings.
At first, the paint was slightly swollen, then water began to drip. Over time, the flow seemed to drag on by itself, but the problem did not disappear. Therefore, I decided to remove the radiators and see what happened. As it turned out, the metal cracked in the place where the fitting was screwed.

Most likely, as they explained to me in the heating system of our city, this was due to the fact that a special additive was added to the water to prevent the formation of scale. However, it also destroys aluminum alloys; therefore, such radiators cannot be installed on centralized heating.

I can not say anything about their use in an autonomous heating system. Outwardly, they look good, fit into the interior, and you don’t have to paint like cast iron.
pros
Low cost, good appearance
Minuses
Poor alloy, destroyed by all kinds of "additives" added to the water in the heating system
Term of use
more than three years
Recommendation to others
Difficult to answer
  • Quality
    3/5
  • Practicality
    3/5
  • Price
    4/5
Show more
Aluminum radiators Teploterm looking where.
A comment
My parents pulled gas pipes to heat the bath. At the same time, aluminum radiators for heat sources were installed in the bathhouse in the kitchen. They look great and you can hang a towel on top to dry, but they warm so badly (THIS IS MY OPINION). But the parents are happy. And the kitchen is cool as they need. But I am freezing, and in the bath I give in and open the door from the steam room to the washing room. Coldly. So I’ll say for an amateur. If you are a finch, it’s better not to buy such radiators.
pros
perfectly replaces batteries with a pipe, it looks better.
Minuses
I wouldn’t put one in my apartment
Term of use
more than one year
Recommendation to others
Difficult to answer
  • Quality
    5/5
  • Practicality
    4/5
  • Price
    4/5
Show more
Teploterm 500/100 - a good aluminum radiator
A comment
Having decided during the repair to change the obsolete cast-iron radiators to more modern ones both in appearance and in heat transfer, I settled on the Teploterm 500/100 model. In my opinion, such Russian products are most effective in our conditions since they are also tested by the manufacturer here.

The aluminum radiator of this model is convenient in that it exists in 4 sizes - it can have 6, 8, 10, 12 sections, so it was easy to choose the option that corresponds to the heated areas of the rooms in the cottage.

Externally attractive radiators are made of an alloy with high thermal conductivity (heat transfer of 1 section at 70 degrees is 207 W), painted white and coated with an anti-corrosion layer on top.
pros
universality, appearance, high heat dissipation, any number of storeys, 10 years warranty.
Minuses
not yet noticed.
Term of use
more than three years
Recommendation to others
Difficult to answer
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    3/5
Show more


Recommended reading:

Climatic equipment - articles and reviews