Metal Ruukki

Finnish metal Ruukki is a world famous brand. In Russia, it is produced at the company's official factories using its technology. The popularity of Ruukki metal is almost as great as the rental of domestic manufacturers. Its price is slightly higher, but Finnish quality captivates many consumers. Ruukki uses imported materials to manufacture certain types of metal tiles. You can read reviews about this metal tile below.

Metal Ruukki

Konstantin

Metalprofile domestic material

A comment

I chose a material for covering the roof. I read a lot of reviews and recommendations, I chose Finstroy company. At first I looked at foreign material, and then I found similar in parameters, only our domestic, which was very pleasing. It turned out that the sales office is located not far geographically, where you can see samples. Leninsky pr. 140 went, looked, bought. It turns out that we can produce material that is no worse than foreign technologies, and it also comes out at a much cheaper price.

pros

1. Compared with foreign profile, this one is cheaper, significantly; 2. Quite light in weight, somewhere around 4 kg, which is quite convenient to work alone (lift, fasten); 3. The thickness of the steel sheet is 0.4 - 0.5 mm; 4. For the wife, a pleasant plus was the color scheme.

Minuses

There are no complaints about the material, we will check with time

Term of use

several months

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Albina Samsonova

Metal profile

A comment

We decided to use Metalprofile and are very satisfied. My husband almost alone covered the roof of the guest house. The material is lightweight, practical and a large selection of colors.

pros

Ease

Minuses

Until you notice

Term of use

several months

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Leonid

Found the best alternative, Metalprofile!

A comment

I took a risk (as it seemed to me before) and, on the advice of a consultant, I bought not Finnish tiles, but ours, Metalprofile. The characteristics are in fact the same. The roof of the eyes pleases, there are no problems, but what else is needed? As a result, I saved 2 times

pros

price and price again, with the same quality

Minuses

learned late about such material

Term of use

more than three years

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Vladimir

I'm upset with Adamant's Hand

A comment

For the roof of the house, I ordered the roof tiles Adamant. The tile came all scratched. When buying, they convinced me that each sheet was shifted with a film. This is a lie. This is not so bad. The main thing is large gaps in places where one sheet overlaps another. The workers themselves had to bend these places first, so that the sheets lay down denser. I don’t know how it will be in operation.

pros

Not

Minuses

Slots in the locks. Between two sheets.

Term of use

less than a month

Recommendation to others

Difficult to answer

Quality
2/5
Practicality
1/5
Price
2/5

Nikolay

Metal Ruukki Adamante

A comment

The price is astronomical, see the gold dust is added, the product RTI No. 1 and then thicker. Sheets like a maple leaf.

pros

Gorgeous view

Minuses

Price, installation complexity.

Term of use

less than a month

Recommendation to others

Difficult to answer

Quality
5/5
Practicality
5/5
Price
5/5

Yulia

Rucca - quality on conscience

A comment

More than five years ago, when metal was not so common, they thought how to cover a balcony with their parents. I no longer wanted to use the traditional slate - after all, it is very fragile, and then you are tortured to change it. Therefore, they opted for metal. The assortment in the store we turned to was not particularly wide. In general, we decided not to save, so as not to change the roof in a couple of years, and bought Rukka's metal tile.

We were assured that this is a well-known company that is famous for its quality. In addition, the roof area of the balcony is small, so not much material was needed. Today we still have not regretted our choice. Installation is elementary, like a child’s designer. And the view is amazing to this day. More than five years have passed, and the metal tile is as good as new - well, perhaps it has become dirty. And so - the paint does not fade, does not give leaks.

pros

Does not fade
Does not leak
It has been over five years without any maintenance or repair

Minuses

High price compared to other manufacturers

Term of use

more than five years

Recommendation to others

Recommend

Quality
5/5
Practicality
4/5
Price
2/5

Catherine

Metal Ruukki Adamante (Pural Matt) - reliable and beautiful

A comment

Last year, we acquired a large country house. His condition was quite decent, but the old coating - slate, was clearly not good. We decided to change to metal. After viewing the information material and consulting with the masters, we chose Ruukki Adamante (Pural Matt). I have known this Finnish roofing manufacturer for a long time. For more than 10 years, my parents' house has been excellently served by a metal roof made by Rannila (now called Ruukki). Not a single leak!

That is why we chose the Finnish Rannila.
Why Ruukki Adamante? First of all, I liked the style - the wave, which gives the profile a special charm. In addition, high-quality galvanization guarantees a long service life. And the company gives a guarantee - 20 years!
For a year of operation - absolutely no comments. We hope that everything will continue to be fine.

pros

great design, long life, manufacturer warranty

Minuses

not

Term of use

more than three years

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Paul

The best of the best!

A comment

For the roof of his house I bought a modular metal tile Finnera from the company Ruuki. It is convenient to install, easy to lift upward, after installing the trimmings there are practically no left. In general, I think that the best metal tiles are made only in Finland, there can’t even be a place for a dispute. A good guarantee on the appearance is 15 years, and from the formation of various corrosion, as much as 40 years. So they’re not afraid for their products. Plus, this tile has a bend of the lower edge, which eliminates the possibility of wiping the bottom sheet, and even a bend helps to make the seam invisible to the eye.

Personally, I give preference only to this company, the quality has been tested for years. The tile does not fade, it looks gorgeous. Do not hesitate, choose this company, it is not for nothing that it is considered the best in the production of metal tiles.

pros

All!

Minuses

Not!

Term of use

more than three years

Recommendation to others

Recommend