7 best mobile air conditioners and selection tips
Overview of the best models of mobile air conditioners, tips for choosing a mobile air conditioning device and rules for calculating power.
The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.
Which mobile air conditioner is better to buy
With all the variety of mobile equipment used for air conditioning, it can be divided into two large groups:
- mobile candy bar;
- mobile split system.
Mobile candy bar
The main difference of the monoblock is a single housing in which all the necessary components and assemblies are located. In this sense, it resembles window air conditioners. Structurally, it is divided into two large compartments. At the top is an evaporator with ventilation equipment. The compressor, condenser and cooling fan are placed below.
Two corrugated sleeves are connected to the lower compartment, the free ends of which are displayed on the street. To do this, you can use an open window or special holes in the wall. On one of the air ducts from the street, fresh air is sucked in, which takes heat from the condenser and is removed back along the other sleeve.
The air in the room circulates through the upper compartment. It cools by contact with the walls of the evaporator. Most manufacturers install a filter on the inlet that prevents contamination of the heat transfer surfaces, at the same time cleaning the atmosphere in the house. Condensate formed during cooling of the air stream is collected in a special container, which must be periodically emptied, unless otherwise provided for in a different way to remove the liquid.
Some models are able not only to cool the indoor air of the room, but also to update it, taking a fresh stream from the street. This may require an extra sleeve. To reduce heat loss through an ajar window, well-known manufacturers suggest purchasing special locks or inserts with holes for the diameter of the hoses used.
Mobile split system
This type of equipment consists of two separate units. The first of them is installed inside the building and contains a compressor, a refrigeration unit and a fan. The second is taken out into the street. It houses a capacitor and another fan. Both parts of the air conditioner are connected by a flexible sleeve, inside of which hoses with circulating freon and an electric cable are laid.
For ease of transportation, the block bodies have rollers and handles. To temporarily fix the external compartment on the wall or other capital structures, brackets with screws or slings are often used.
Inverter air conditioner or conventional
The principle of operation of a compressor of traditional air conditioners does not imply the possibility of regulating its operation mode. It can be either on or off. Frequent state changes negatively affect the life of the equipment.
Devices equipped with a high-frequency current converter (inverter) are able to smoothly change the rotation speed of the motor, which gives them significant advantages.
The main ones are:
- high accuracy of maintaining a given temperature regime;
- the absence of peak loads reduces noise;
- energy savings of about 30-35% are observed in comparison with conventional air conditioners of the same power.
Inverter air conditioners have only one significant drawback - they are unstable in conditions of voltage fluctuations in the network. For suburban villages, this situation continues to be the norm, and it is there that most often mobile devices are needed.
How to choose the power of a mobile air conditioner
When choosing an air conditioner, you should first pay attention to its power. It is directly related to the performance of equipment and its ability to maintain the necessary microclimate in the house. It is necessary to consider:
- volume of the room;
- total area of window openings;
- their location relative to the sun;
- the presence in the room of other equipment capable of generating heat.
In rough calculations, they use a simplified dependence obtained from the calculation, which for every 10 m2 The area needs 1 kW of air conditioning power. For more accurate calculations, it is recommended to apply the formula:
P = SHq + Q1
Where:
- P - the minimum required power of the air conditioner, W;
- S - area of the premises, m2;
- H - ceiling height, m;
- q - coefficient taking into account the sunlight of the room, W / m3;
- Q1 - the amount of heat from people and household appliances.
The q-factor is taken equal to:
- 30 for rooms with north-facing windows or when buildings or trees block direct sunlight;
- 35 for rooms with normal daylight;
- 40 for rooms with panoramic windows or oriented strictly to the south.
When finding Q1 consider that the heat input is:
- 130 watts per person;
- computer up to 400 W;
- TV 700 watts.
Having decided on the power, you can proceed to the selection of specific equipment.
The best mobile air conditioners
Domestic manufacturers cannot yet offer truly high-quality developments, so it is better for the buyer to focus on models of foreign brands.
Electrolux EACM-11CL / N3
The compact air conditioner from a well-known Swedish company, assembled in China, is made in the form of a monoblock and is designed for floor installation. It with high accuracy maintains the set air temperature in rooms up to 27 sq.m. He has three high-speed fan operation modes and three types of tasks: ventilation, cooling and drying.
The device is controlled using a remote control. There is a function for storing settings and a built-in timer. Noise level does not exceed 44 dB.
Main characteristics:
- cooling power 3.22 kW;
- maximum air flow 330 m3/hour;
- dimensions 435x690x330 mm;
- weight is 26 kg.
Pros of Electrolux EACM-11CL / N3
- Compactness.
- Laconic design.
- A good set of features.
- Convenience of management.
- Condensate does not accumulate, but evaporates and is vented out along with heated air.
- Economical power consumption.
- Two year warranty.
Cons Electrolux EACM-11CL / N3
- Noticeable compressor noise.
- In extreme heat, there is not enough power for cooling.
- No suction sleeve. Air for cooling is taken from the room and after heating is taken out. A vacuum is created, leading to an intense leak of warm air from the street.
Conclusion. This air conditioner is inferior in efficiency to stationary models, but it is convenient for frequent moving.
Electrolux EACM-13HR / N3
Another mobile air conditioner from the same manufacturer. It is more powerful and able to maintain a given microclimate in rooms up to 33 sq.m. It also has 3 fan operation modes, but the heating function has been added to the cooling, ventilation and drying capabilities. When dried, it is able to condense up to 35 liters of water per day.
Using this model is convenient due to the intuitive display, self-diagnosis of faults, the remote control, the presence of a timer and the ability to switch to night mode. Small rollers in the lower part of the housing help to move the equipment. Noise level 44 dB.
Main characteristics:
- cooling power 3.81 kW;
- heating power 3.66 kW;
- maximum air flow 410 m3/hour;
- dimensions of 480x795x400 mm;
- weight 34 kg.
Pros of Electrolux EACM-13HR / N3
- High performance.
- Beautiful design.
- Long service life.
- Universal feature set.
- Convenience of management.
- Manufacturer's warranty 3 years.
Cons Electrolux EACM-13HR / N3
- Somewhat great for a mobile model.
- In heating mode, it is much inferior in efficiency to conventional convectors.
- Excessive noise.
Conclusion. This model is suitable as a temporary air conditioner when for some reason it is impossible to install a stationary unit.
Ballu BPAC-16CE
A beautiful and productive candy bar of a well-known Dutch company is produced in China. It is designed to maintain comfortable climatic conditions in rooms up to 44 sq.m. It can be used for ventilation, cooling and air drying.
The model works in automatic mode. She has an informative digital control panel and a remote control. There is a timer, an air purification filter, a three-speed fan, an alarm for filling the condensate tank. The refrigerant used is safe for human health and does not harm the state of the ozone layer of the atmosphere. Noise level up to 50 dB. 1 year manufacturer's warranty.
Main characteristics:
- cooling power 4.6 kW;
- maximum air flow 520 m3/hour;
- dimensions 365x775x568 mm;
- weight 42 kg.
Pros of Ballu BPAC-16CE
- High power.
- Stylish design.
- Maneuverable chassis.
- Fully equipped for quick installation.
- Profitability of energy consumption.
- Reasonable cost.
Cons Ballu BPAC-16CE
- There is no external air intake, which reduces the efficiency of the unit in cooling mode.
- Quite noticeable noise, which only slightly decreases when switching to night mode.
Conclusion. This monoblock is often purchased by tenants of trade pavilions and office premises, but without a fixed air conditioning.
Zanussi ZACM-09 MS / N1
This reliable and durable representative of the Italian brand is suitable for maintaining a comfortable microclimate in rooms up to 26 sq.m. He has four operating modes: cooling, ventilation, drying, night. The collected condensate evaporates and is discharged outside the premises with the heated exhaust air.
The model is equipped with a hidden LED display, remote control, 24-hour timer, wheels for ease of movement. The stylish case is painted white. The noise level in the operating mode does not exceed 48 dB. 1 year warranty.
Main characteristics:
- cooling power 2.64 kW;
- maximum air flow 350 m3/hour;
- dimensions 435x715x350 mm;
- weight 29 kg.
Pros of Zanussi ZACM-09 MS / N1
- High reliability.
- Convenience of management.
- Minimal maintenance.
- Economical power consumption.
- Good feature set.
- There is a self-diagnosis system with a fault message.
- The ability to control the direction of air flow.
Cons Zanussi ZACM-09 MS / N1
- High noise level.
Conclusion. Inexpensive and mobile model is a great option for those who rent a house or rent a room for work. Installation and dismantling require a minimum of time, and compact dimensions simplify transportation.
Timberk AC TIM 09C P8
Another development of Swedish engineers in China is designed to cool air in rooms up to 26 sq.m. It can also work in the modes of drying and ventilation. It has reliable mechanical control and a removable air filter that is convenient to clean and wash. Condensation will automatically evaporate.
This model is characterized by compact dimensions, stylish design and easily turning rollers. It is equipped with a flexible air supply sleeve and fasteners to it. Depending on the choice of the operating mode, the noise level is 45-53 dB.
Main characteristics:
- cooling power 2.63 kW;
- maximum air flow 330 m3/hour;
- dimensions of 480x695x270 mm;
- weight 24.7 kg.
Pros Timberk AC TIM 09C P8
- High performance with excellent energy efficiency.
- Good functionality.
- The narrow case is convenient for storage and transportation.
- Modern design.
- Convenience of service.
- Long service life.
- Affordable price.
Cons Timberk AC TIM 09C P8
- Noticeable noise.
- There is no remote control.
- There is only a choice of modes without fine tuning.
Conclusion. This model is a good budget option for a summer residence, small office or workshop. It is convenient to move and store. Long service life solves the problem of air cooling for many years.
General Climate GCP-09ERC1N1
A very beautiful candy bar from a well-known international company, made in China. It is designed for rooms up to 30 sq.m. It can be used for cooling, heating, ventilation and air drying. The night mode and gas ionization function are provided. The fan runs at three speeds. The resulting condensate enters the evaporation zone and is removed from the room with warm air.
To control there is a touch panel at the top of the case and a remote control. All settings are automatically remembered. The built-in timer is designed for 24 hours. The diagnostic system on time reports any malfunction. The whole structure is mounted on wheels. Noise level 54 dB.
Main characteristics:
- cooling power 2.6 kW;
- heating power 3.04 kW;
- maximum air flow 420 m3/hour;
- dimensions 478x826x378 mm;
- weight 29.5 kg.
Pros of General Climate GCP-09ERC1N1
- High performance.
- Large feature set.
- Convenience of management and service.
- The accuracy of the settings.
- Unusual design.
- Good equipment.
Cons General Climate GCP-09ERC1N1
- Noise.
- Short air sleeve.
- At high humidity, condensate builds up quickly. I have to merge manually.
Conclusion. A good model for installation where there is no possibility of installing a stationary split system. With extensive functionality, it also looks beautiful.
Electrolux EACM-08CL / N3
Small-sized monoblock for rooms with an area of no more than 20 m2 works in cooling, ventilation and drying modes. This model is easily transported, quickly installed and accurately maintains the set temperature. It has an intuitive control panel, a remote control, a three-speed fan, a timer, movable rollers in the lower part of the body and a corrugated hose for removing heated air.
Condensate does not accumulate, but evaporates completely. Noise level does not exceed 44 dB.
Main characteristics:
- cooling power 2.4 kW;
- maximum air flow 330 m3/hour;
- dimensions 435x690x330 mm;
- weight 25.5 kg.
Pros of Electrolux EACM-08CL / N3
- Compactness.
- Profitability.
- Good functionality.
- High accuracy of maintaining the set temperature.
- Convenience of operation.
- Long service life.
- Affordable cost.
Cons Electrolux EACM-08CL / N3
- Noisy work.
- Short duct
Conclusion. Economical in price and ongoing operation, the model is suitable for a summer residence, home or office. You should not count on absolutely silent operation, but it copes with cooling small rooms perfectly.
