7 best building bubble levels of various lengths
To find out which building bubble level is better, we studied their characteristics and collected customer reviews. The rating below will help you choose the appropriate model for specific tasks, which will be convenient to work with.
Bubble levels 50-60 cm
Instruments of this length are compact and convenient for measurements on small structures. Due to their light weight and dimensions, it is especially practical to use them where it is often necessary to measure the flatness of the plane or vertical lines.
 |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| VIRA 100 251 600 mm | KAPRO PLUMBSITE OPTI-VISION CONDOR 60 cm |
KAPRO PLUMBSITE SHARK 50 cm 920-10-50 |
|||||||
| Length mm | 600 | 600 | 500 | ||||||
| Weight, kg | 0,368 | 0,69 | 0,39 | ||||||
| Number of eyes, pcs | 3 | 2 | 2 | ||||||
| Number of handles | 2 | 1 |  |
||||||
| The presence of a magnet |  |
|
|
||||||
VIRA 100251 600mm
Accessible metal level with three eyes and a magnetized wall. It has a length of 60 cm and weighs 368 g. The I-beam shape of the case contributes to high strength when dropped or impacted.
+ Pros of VIRA 100251 600mm
- Ampoules contain a luminescent substance that accumulates light and then reflects it in the dark - this will help to set the exact level even in low light.
- In the middle of the case are two slots for a comfortable grip with your fingers, so as not to drop the tool at a height.
- The ends are equipped with rubber chippers, so the level can be safely set to the floor or wall - it will not be damaged over time.
- One of the eyes is rotary - they can display not only angles of 45 degrees, but also in any other value on the applied scale on the circle.
- The magnetic sidewall is firmly held on metal.
- Scale with millimeters and centimeters on the side face.
- Does not bend during falls.
- Cons VIRA 100251 600mm
- Capsules may not be calibrated initially - you will have to move and tune them to the old proven level.
- The scale on the rotary ampoule does not match the actual position of the degrees.
- Offset marks and inscriptions on the body.
- The rotating eye is constantly spinning (hanging), which distracts when doing work.
Conclusion. This is a good level, both for ordinary construction work, and for work with metal structures. The model is magnetically attached to the metal and does not need to be held. With free hands, it is easy to move the part to a level position and lock it.
KAPRO PLUMBSITE OPTI-VISION CONDOR 60 cm
Bubble level from the Israeli manufacturer with two eyes for vertical and horizontal. Made of aluminum with a hollow rectangular body.
+ Pluses PLUMBSITE OPTI-VISION CONDOR 60 cm KAPRO
- Slot on the case with a plastic trim convenient for holding the device with one hand.
- Rubberized ends to maintain the integrity of the body.
- You can quickly free your hands by hanging the level on the hole on either side.
- The capsules are placed in a red edging, making them clearly visible under different lighting conditions.
- The lines on the ampoules do not erase for a long time, because the vessels are recessed deep into the body and do not touch the surfaces or hands of the master.
- The lenses have high visibility - they can be seen even at an angle of 45 degrees.
- Particularly robust housing that can withstand repeated drops that do not affect instrument accuracy.
- Cons PLUMBSITE OPTI-VISION CONDOR 60 cm KAPRO
- There is no scale for marking on the side of the case - you have to get a tape measure each time you work with it, when you need to quickly measure something.
- Only two eyes (vertical and horizontal), so the line at 45 degrees cannot be beaten off.
- High price.
- The level is white, so it quickly gets dirty at the construction site.
- There is no magnet in the design - when working with metal, you will have to hold it with your hand.
Conclusion. Good level for high precision processes. The model has a minimum error of 0.5 degrees. Suitable for a craftsman who is constantly busy assembling in a factory or installing furniture in houses.
KAPRO PLUMBSITE SHARK 50 cm 920-10-50
Another bubble level from an Israeli manufacturer.It has a length of 50 cm and two measuring ampoules made of polyacryl, which can withstand shock.
+ Pluses PLUMBSITE SHARK 50 cm KAPRO 920-10-50
- At the end there is a long slot for convenient storage of the level by hanging.
- Green ampoules are clearly visible at any time of the day and under various lighting conditions.
- A rubber softening insert permits striking the level body to quickly level the structure underneath.
- The rail-like design withstands well falls.
- For some users, it has been serving for 10 years with active use.
- The lines marking the boundaries for the air bubble are drawn inside the bulb, so they will never be erased.
- Cons PLUMBSITE SHARK 50 cm KAPRO 920-10-50
- Missing magnet.
- Dust is clogged under the outer glass and the readings become less visible.
- Some do not like the small air bubble and the available distance to the marks in an even position - this way you can make an error.
Conclusion. Good building bubble level for brick or tile masonry. He has a special part for hammering, not knocking accuracy of the eyes, but helping to plant the material to which the tool is attached.
Bubble levels 100-120 cm
Levels with a length of 100-120 cm allow you to set vertical and horizontal planes of greater length (support racks, beams, door frames, window frames, heating pipes and sewers). These are already professional models that are used for construction purposes.
 |  | |||||||
|---|---|---|---|---|---|---|---|---|
| KAPRO OPTI-VISION CONDOR 905-40 120 CM | KAPRO PLUMBSITE GENESIS 100 cm | |||||||
| Length mm | 1200 | 1000 | ||||||
| Weight, kg | 1,27 | 0,8 | ||||||
| Number of eyes, pcs | 2 | 2 | ||||||
| Number of handles | 2 | |
||||||
| The presence of a magnet | |
|
||||||
KAPRO OPTI-VISION CONDOR 905-40 120 CM
Level 120 cm long with two eyes and an additional window to see the readings vertically looking at the edge of the instrument. Endowed with two handles with rubber inserts that facilitate holding the tool weighing 1.3 kg.
+ Pluses PLUMBSITE OPTI-VISION CONDOR 120 cm KAPRO
- The red border around the ampoules gives a clear background and makes the air bubble easily noticeable.
- You can hold the level with one or two hands - for this, on the 120 cm model, two slots with a rubber trim are made.
- The shape of the flask is specially designed so that the readings can be seen at an angle of 45 degrees.
- Rubberized ends ensure the integrity of the housing during a fall and soften vibration from shock for flasks.
- High accuracy of indications.
- Holes for hanging from both ends.
- Cons PLUMBSITE OPTI-VISION CONDOR 120 cm KAPRO
- Only two eyes for checking vertical and horizontal position.
- It does not have a magnetic strip to hold onto the metal.
- A soiled white body quickly gets dirty in glue, sealant and mortar.
- The photo in most online stores is not true (the photo shows a shorter copy).
Conclusion. This is the best bubble level for the wizard to install entrance and interior doors or window installation. High precision ensures a smooth installation. An additional viewing window in the housing will allow you to align the vertical even with an inconvenient location.
KAPRO PLUMBSITE GENESIS 100 cm
Product from the Israeli brand 100 cm long. It has a magnetic strip and a prism to control the position of the air bubble from the end of the case.
+ Pluses PLUMBSITE GENESIS 100 cm KAPRO 781-40-100RM
- Resistant to bending and torsion.
- Powerful magnets reliably hold the level on the structure - it will not fall off and will not break.
- You can look at the flask with a vertical indicator from different parts of the case - for this an additional window on the edge is highlighted.
- The rubberized hand hole is suitable for use without protective gloves.
- Large rubber rings on the ends are designed to hang the tool for storage and at the same time absorb shock.
- The bubble fits exactly in size between the two risks - the slightest deviation is visible.
- Cons PLUMBSITE GENESIS 100 cm KAPRO 781-40-100РМ
- Metal shavings constantly stick to the magnets.
- Only two eyes.
- High price.
- No scale with length measurement.
Conclusion. The model is optimal for installing gates, fences and other metal structures. The level is equipped with a magnetic strip, which ensures fixation on the product and frees the hands of the master.It is easy to attach to the rack and engage in concreting.
Bubble levels 200 cm
The 200 cm long tool is used on particularly large surfaces. It allows you to see the evenness of beams, walls, long communications. This helps to smoothly expose the supporting structures, but it is inconvenient to work on a limited space with such a tool. Here is a rating of bubble levels 200 cm long:
 |  | |||||||
|---|---|---|---|---|---|---|---|---|
| KAPRO PLUMBSITE GENESIS 200 cm 781-40-200 | KAPRO 905-40-200 | |||||||
| Length mm | 2000 | 2000 | ||||||
| Weight, kg | 1,44 | 3 | ||||||
| Number of eyes, pcs | 2 | 2 | ||||||
| Number of handles | 2 | |
||||||
| The presence of a magnet | |
|
||||||
PLUMBSITE GENESIS 200 cm KAPRO 781-40-200RM
Level 200 cm long with two eyes. It is made in a rectangular case with a hollow inside, so it weighs only 1.44 kg, despite its large size.
+ Pluses PLUMBSITE GENESIS 200 cm KAPRO 781-40-200RM
- The walls of the flask are made of polyacryl; therefore, they are particularly durable and contribute to the long life of the device.
- Built-in system of powerful magnets - the level will not fall off the structure with a little shake.
- The Plumbsite system has been implemented, allowing you to see the capsule readings from the front and side.
- The metal is powder coated in red, providing visibility at the construction site and less soiling.
- A tough profile that can withstand foot attacks.
- It is easily cleaned of glue and dirt due to its smooth body.
- Cons PLUMBSITE GENESIS 200 cm KAPRO 781-40-200RM
- Paint slips in places from falls.
- With it, you can’t set the angle to 45 degrees.
- When working with metal structures, chips constantly stick to the magnets.
- There is no scale with centimeters that would be useful at such a long length so as not to use roulette in parallel.
- Dear model.
Conclusion. This is an excellent level for construction work with metal structures. Magnetic blocks will ensure reliable retention of a long tool and allow you to adjust parts of the structure with two hands.
KAPRO 905-40-200
The model with the lowest error rate is 0.029 degrees per meter. Suitable for extremely precise work. The flasks are made of polycarbonate, which reliably protects them from damage.
+ Pros of KAPRO 905-40-200
- Shock absorbing pads on tool ends.
- On the horizontal and vertical eyes, a red background is reflected on the border of the air bubble, which helps to clearly notice its position relative to the notch.
- Rubber trim at the handles for comfortable holding a large level.
- Overview of flasks from any position at an angle of up to 45 degrees without optical distortion.
- One of the highest accuracy rates.
- Wide milled surface.
- Resistant to bending and twisting.
- Cons KAPRO 905-40-200
- The cost is high.
- Suitable only for horizontal and vertical installation - there is no third window for inclined surfaces.
- The design lacks a magnetic block.
- When ordering, you need to specify the color - sometimes it comes white instead of red and vice versa.
Conclusion. Fine bubble level for decorating. Due to the length of 200 cm, it will be possible to level the walls with plaster and putty, without holes and drops. Thanks to the sight on the costal side, it’s convenient to set up beacons.
