10 best vice of joiner's, metalwork and machine models
The rating of the best vice of all types will help you choose proven models that will not deteriorate from the load and can hold the material well. A review of carpentry, locksmith, and machine models is based on reviews and features.
Best Bench Vise
Bench vise models are designed to work with various metals and have sizes from 100x100 mm to 200x400 mm, which is selected based on the specifics of the tasks performed.
They are mounted on a workbench stationary through the provided holes or using a screw clamp. The vice fastened with a screw clamp is easy to move from place to place.
 |  |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| WILTON BCV-60 65023EU | COBALT 246-029 | Case Technology TSSN-63-S | Jonnesway C-A8 4 " | |||||||
| Jaw width mm | 60 | 50 | 63 | 101,6 | ||||||
| Dimensions, mm | 150x90x190 | 200x180x85 | 230x63x200 | 340x160x170 | ||||||
| Stroke mm | 40 | 60 | 80 | 100 | ||||||
| Weight, kg | 1,2 | 2,2 | 3,7 | 8,3 | ||||||
| Anvil |  |
 |
|
|
||||||
WILTON BCV-60 65023EU
This is a budget version of a mini vise for plumbing from an American manufacturer. They reveal up to 40 mm, but despite this they have wide lips of 60 mm. Mounting to a table or workbench is possible by screw clamping from below.
+ Pros of WILTON BCV-60 65023EU
- They have pronounced stiffening ribs on the leg, which ensures a strong hold of the vise on the edge of the workbench, despite the exerted loads.
- The lightest weight among similar models of 1.2 kg simplifies the transfer from one workplace to another, and even outside the building.
- The surface of the lips is smooth, so they do not leave marks on soft materials.
- Quick installation.
- The guide of the movable part has a slight play.
- The body is made of cast iron by casting.
- Neat work with high-quality painting.
- Lips converge exactly without gaps.
- Cons WILTON BCV-60 65023EU
- In depth, you can place the workpiece no more than 20 mm.
- To clamp a metal part, you need to use wooden gaskets, otherwise, with a strong tightening of the vice, dents remain on the lips.
- There is no way to replace the lips after they work out their life and lose their shape.
- Users complain of a tight spring.
- If tightened tightly, it may crack the base - they need very careful handling.
Conclusion. This model is included in the rating of bench vice due to quality and affordable prices. But small dimensions allow it to be used only for processing small parts. They will be an excellent assistant to a jeweler or watchmaker.
COBALT 246-029
Russian vice with a stroke of 60 mm and a lip width of 50 mm. The case is made of cast iron, and the clamp to the table is carried out by a screw made of structural steel. Equipped with a rotation function on the base.
+ Pros COBALT 246-029
- Factory assembly and metal nameplate confirming quality.
- You can rotate at different angles for more convenient drilling or cutting a clamped part.
- It is possible to change lips by unscrewing two screws in countersunk holes.
- Good paint that protects against corrosion for a long time.
- Easy change of degree of rotation thanks to the key on the left side.
- Suitable for most workbenches and countertops up to 50 mm thick.
- The lips are made of good steel and converge evenly.
- Cons COBALT 246-029
- The pivot pins have stops at the ends so as not to fall out, but when tightened they can go into extreme positions and pinch the skin if you work without gloves.
- There is no limiter at the maximum twisting of the moving part - it just comes out of the thread and disappears.
- They come with cheap lubrication, so they need to be disassembled and re-lubricated with the screw and guide after purchase.
Conclusion. A bench vise is distinguished by the presence of an anvil, which can be useful for leveling nails or assembling small parts.Also, the vice has a rotation function, convenient for processing workpieces with a grinder from different sides.
Case Technology TSSN-63-S
Classic cast iron vise weighing 3.7 kg with thick walls. They have a stroke of 80 mm and a lip width of 63 mm. In the center, a part with a depth of 40 mm can be clamped, and at the edges this indicator is not limited.
+ Pros Technology Case TSSN-63-S
- Made of thick cast iron HF 50.
- According to the standards, a force of up to 1000 kgf is possible.
- Equipped with 50X alloy steel jaws with a strength rating of 45-53
- Very securely attached to the workbench, but easily detached thanks to the clamp.
- The ends of the handles have plastic stops that soften the lowering to the extreme positions.
- Parts subject to wear can be replaced - they are always on sale at an affordable price.
- Equal convergence of the working parties.
- Cons Case Techniques TSSN-63-S
- There is no anvil - if you need to level something, you will have to look for a thick channel or rail in the garage.
- Regularly pinch the skin with restraints - work only with protective gloves.
- The price is too high for a small model.
Conclusion. These a bench vise is well suited for a garage to securely secure the part from the machine. The model differs in a wide clip with the originalnew form of execution, which provides a more solid mount on the workbench - this should be paid attention to those who plan to put strong pressure on the sides of the workpiece during processing.
Jonnesway C-A8 4 "
Vice from the Taiwanese brand with a lip width of 101 mm and a stroke of 100 mm. They are made with a tube-shaped body, inside of which a screw is hidden, which protects it from moisture and debris.
+ Pros Jonnesway C-A8 4 "
- Broad lips and a big stroke.
- They can clamp objects vertically.
- Swivel platform with a small key tightening.
- The handle is equipped with rubber caps to cushion the fall and is coated with chrome, which protects against corrosion.
- Wide ears for mounting to countertops.
- You can replace the lips.
- Wide platform and narrow anvil protrusion.
- Cons Jonnesway C-A8 4 "
- The tightening shaft is located inside and to lubricate it, you will have to disassemble the vice in two parts.
- The key to fix the rotary mechanism close to the body - it is inconvenient to twist it.
- When clamping parts made of soft metals (copper, aluminum) they leave traces of the relief of the lips.
Conclusion. The model is designed for fixed mounting on a workbench with four bolts. Thanks to the embossed surface of the lips, you can reliably clamp the rectangular part. Under them there are semicircular lips for fixing the pipes.
The best vice for machine tools
This category of tools has larger dimensions and is intended for fixing to the working surface of machines (milling, cutting, drilling). The vice is designed to hold the workpieces securely so that the powerful revolutions of the machines do not tear the product. In equipment, as a rule, the executive part (cutter or drill) is stationary or has a small stroke to the sides.
In order not to rearrange the vice to the left or to the right with workpieces of different sizes, such devices are equipped with a longitudinal and transverse stroke. They are used in factories and in workshops where machine equipment is operated.
 |  |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wilton 11693RU | Proma KS-100 | Blacksmith WA1-100 | WILTON Q75 75x80 mm WI91193RU | |||||||
| Lip width mm | 75 | 100 | 90 | 75 | ||||||
| Weight, kg | 7,5 | 9,7 | 12 | 1,95 | ||||||
| Stroke mm | 80 | 102 | 100 | 80 | ||||||
| Rotation function | |
|
|
|
||||||
Wilton 11693RU
The goods of the American manufacturer. It belongs to the category of professional vice. It has a lip divergence of 80 mm with a working width of 75 mm. In addition to the transverse stroke of the working clamping part, a shift of the center is provided, and there is also a longitudinal stroke.
+ Pros of Wilton 11693RU
- To unfasten the vise and reinstall it to another place, it is not necessary to unscrew the bolts completely - just loosen them and remove them from the grooves.
- There is a vertical and horizontal slot on the lips so that thin objects do not move (pins, wire rod) and are firmly held in a clamped position.
- Ball stops at the ends of the handles.
- There is a scale with divisions for fine adjustment.
- High-quality assembly without backlash.
- Good painting without drips on the working moving area.
- Equipped with three hexagons for assembly and adjustment.
- Cons Wilton 11693RU
- Wide internal parts do not allow fixing a large part vertically - this limit is limited by a lip height of 35 mm.
- No anvil and turning function.
- Heavy (7.5 kg), therefore suitable only for stationary use.
- Cast handles for moving the case do not sit completely on the axis - they are interfered with by the edges that need to be grinded with a file (factory marriage).
- Tight move.
Conclusion. These are good machine vice for alternating both manual processing of parts and for fixing in a milling machine. To do this, grooves are provided in the base, which can be fixed to the workbench or platform of the machine. Suitable for small production, where accuracy is important and assembly is carried out according to the drawings.
Proma KS-100
Vise from the Czech manufacturer with a stroke of 102 mm and a width of jaws of 100 mm. Equipped with a stroke for longitudinal and transverse transmission of 127 mm, which makes them maneuverable and simplifies work behind the machine.
+ Pros Proma KS-100
- Access to screws for easy lubrication.
- Forward, backward and to the side there are limiters, so nothing will fall apart if the operator unscrews the handle to full.
- High-quality paint without drips.
- The chrome-plated handles are pleasant to the touch, protected from corrosion, and the L-shape is more convenient for regular rotation.
- There is a tuning of the stiffness of the stroke in order to select the desired mode for different types of work (it is regulated by screws located perpendicular to the shaft).
- Removable lips for longer use of the vise itself.
- For rearrangement on the bed (if there is not enough travel to supply the part), it is enough to release the clamping bolts and withdraw them through the slots in the vice body.
- Cons Proma KS-100
- The first installation is not the easiest due to the weight of 9.7 kg.
- An open shaft system gives quick access to chips.
- When working on a milling machine and watering a part with a cooling emulsion, the body is quickly covered by corrosion.
- The design of the vise is focused on the installation in the drilling machine with the side of the jaws to the vertical stand, but this prevents the fixing of long parts (they abut against the stand). When the body is rotated 90 degrees, the handle for tightening starts to rest in the rack - an additional adaptation is needed for adaptation.
Conclusion. it reliable vise for the drilling machine, because it is assembled very high quality and precisely regulated on the sides with already clamped blank. With their help, it will be possible to drill holes according to strictly specified parameters with a minimum error.
Blacksmith WA1-100
Special vise, working on the principle of a clamp, for fitting parts to each other at an angle of 90 degrees. Can be used on profile pipes and plates. They have a working stroke of 100 mm and a sponge width of 90 mm.
+ Blacksmith WA1-100 Pros
- The walking part swings with emphasis on the axis, which ensures uniform distribution of clamping force, alignment of the workpieces and simple extraction of the already welded structure.
- The screw is copper-plated and protected against corrosion.
- On the base there are long grooves for fastening in the machine - you can shift the vice to the side by loosening the bolts, and not by completely unscrewing the fasteners.
- Durable metal frame.
- Guaranteed 90 degree positioning eliminates the need to check workpieces with a square during assembly.
- Come in preservation grease.
- Cons Blacksmith WA1-100
- Thin and uncomfortable handle.
- Relocation from machine to machine is not easy - weight 12 kg.
- From the vibration on the machine, the bolt of the mobile handle can unwind - it is necessary to put the elastic under it.
- The fixed stop cannot be replaced - it is part of the housing, and the internal stop is expensive.
Conclusion. This is a good clamp vise for use on a milling machine or drilling holes in workpieces assembled at an angle of 90 degrees (safe frames, brackets for installing air conditioners, etc.).Thanks to the vise, it will be convenient to simultaneously clamp the product, drill it and weld.
WILTON Q75 75x80 mm WI91193RU
The budget model of the vice from the American brand, assembled in China. It has a stroke of 80 mm and a sponge width of 75 mm. There are four long slots for fastening to the bed, facilitating lateral mixing.
+ Pros of WILTON Q75 75x80 mm WI91193RU
- High-quality durable cast iron castings.
- Corrosion-proof shaft well tolerates water and other coolant.
- The handle is also made of stainless steel and has a swivel mechanism that provides compactness and tightening in a comfortable position for the operator.
- Lips can be replaced.
- The movable part has a hinge between the shaft and lip, which aligns the part before clamping.
- The screw rotates without jamming.
- Cons WILTON Q75 75x80 mm WI91193RU
- The height of the jaws is only 19 mm - you will not pinch large objects.
- There is no rotation function.
- There is a noticeable backlash in the handle and vertical in the movable lip.
- A spacer is needed between the bed and the vise, because on some models the rotary handle touches the workbench.
- The lower surface of the movable part is painted, and poor processing is hidden under it - for convenient work it is necessary to grind it additionally.
- There are sharp burrs on the steel plate that require grinding.
Conclusion. This is one of the easiest vices to use on the machine. Suitable for milling or drilling installation. But the lack of quick adjustment for the longitudinal and transverse stroke allows you to use them where the same workpiece is involved and does not require frequent resizing.
The best carpentry vise
Joiner's vise is designed to clamp workpieces made of wood to drill, plan or cut the material with other tools. Depending on the design, they can be floor mounted, in the form of a stand, desktop or for a bed of various machines.
 |  | |||||||
|---|---|---|---|---|---|---|---|---|
| Triton SJA100E TR281928 | Wilton WWV / 175 65017EU | |||||||
| Jaw width mm | 178 | 175 | ||||||
| Dimensions, mm | 810x330x295 | 390x260x140 | ||||||
| Rotation functions | |
|
||||||
| Stroke mm | 955 | 210 | ||||||
| Weight, kg | 14,5 | 7,2 | ||||||
Triton SJA100E TR281928
Vice from the Australian brand with a stroke of 955 mm and a sponge width of 178 mm. The clamping plate is moved manually, and the pulling is carried out by a foot drive.
+ Pros of Triton SJA100E TR281928
- Large range of sizes of installed parts.
- Quick change in the distance between the lips.
- Reliable fixation - they will hold the door leaf taken around the corner.
- To clamp the part, it is enough to press the foot on the pedal - hands at the same time remain free and may already begin to perform other processes.
- Mobile equipment can be folded and transported to another facility.
- So that the sponges do not leave dents on the metal, they are equipped with removable polyurethane linings.
- A convenient height of 980 mm above the floor does not require a workbench.
- The clamping force is 1000 kgf.
- Swivel mobile sponge.
- Cons Triton SJA100E TR281928
- Cost is one of the highest in the category.
- The feet of the stand may stagger.
- If you clamp the whole log, then the metal on the sponge can be deformed.
- It will be possible to store only in a horizontal position - the clamp switch interferes in the vertical.
- To work with especially large workpieces, it is practical to have two such vice at once, which increases the amount of investment.
Conclusion. This is a universal vice for clamping both large and small wooden parts. A 955 mm stroke allows even the door leaf to be fixed in them. Suitable for a spacious workshop where large structures are processed: fence racks, gazebos, interior doors, chairs, etc. Suitable for frequent transportation due to folding legs.
Wilton WWV / 175 65017EU
Another model from the American brand Wilton, cast from thick cast iron and equipped with a steel screw. The moving part moves on a shaft and two more guides from a stainless steel.
+ Pros of Wilton WWV / 175 65017EU
- Smooth running clamping mechanism.
- Increased resistance to deformation.
- Two holes and two grooves for fixing a vice on a workbench or bed.
- Through-jaws are provided in the jaws in order to fix through them linings of any material (wood, plastic, rubber) having an even greater height and width.
- 210 mm stroke for large workpieces.
- Wooden parts are compressed very powerfully and are not released over time during prolonged manipulations on the workpiece.
- A wide thread pitch provides quick dilution and flattening with a minimum number of revolutions.
- Cons Wilton WWV / 175 65017EU
- Metal lips are not equipped with anything initially, therefore, additional investments are required to complete the carpentry vice.
- For some buyers, the cheeks on the vice were not parallel - one edge already closed, and on the second a gap.
- Backlash of the front lip of 5 mm in different directions.
Conclusion. This is a great choice for a home workshop. Joiner's vice will help to clamp a large detail thanks to the height of the jaws 70 mm and a width of 175 mm.
The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.
