Hammers Interskol

Interskol punchers - convenient household and professional power tools, with a wide range of use. Their main purpose is drilling holes in concrete and brick structures. The equipment of the tool with special adapters and nozzles allows you to use the tool for the following operations: chipping; drilling wood and metal; use as a screwdriver; for mixing mixtures; for use in slotting mode.

Hammers Interskol

Low prices of the Russian manufacturer, the quality of the brand with branches in Spain and Korea, a variety of models, made Interskol the leader in domestic sales.

Among the positive ratings that the Interskol puncher deserves, negative reviews are caused not by poor quality, but by the inability of the user to make the right choice from a variety of company models.

The power of the proposed models of rotary hammers, directly related to reliability, ranges from 0.45 to 1.1 kW. Greater power also implies the ability to install a larger diameter drill.

For professional use, more powerful and heavy tools are recommended, and for home repair it is enough to purchase a light model.

View / Hide Description

Sergei

Household perf with quality below average

A comment

From the line of punchers, the price attracted, the second perf was not asked for a housewarming

pros

Lower Brand Price

Minuses

I have 2 perforations with the same failure, the washer in the cartridge crumbled after 3 months of inactive use, no one carries parts in our city. The power cord is covered with poor-quality insulation, breaks in the cold. The fact that it is heavier and warms faster is trivial

Term of use

half a year

Recommendation to others

Not recommend

Quality
1/5
Practicality
2/5
Price
1/5

Nikolay

reliable tool

A comment

I liked the ratio of price and quality - in the case of Interskol it, in my opinion, is one of the best. Plus, the guarantee goes to the tool large enough, which also can not but rejoice

pros

quality

Minuses

few accessories

Term of use

half a year

Recommendation to others

Recommend

Quality
4/5
Practicality
4/5
Price
5/5

Andrey Bezler

Puncher Interskol P-26 / 750EV - suits me in all respects

A comment

The best punch for home. With sufficient power, it is very compact thanks to its vertical layout. With it, you can easily punch a 3/4 pipe hole from the kitchen to the bathroom, dodging in the cabinet under the sink. This was just what I had to do when we started repairing the plumbing. With any other unit, I would have to disassemble half the kitchen set. Or lift the bathroom.
The impact drill replaced immediately and forever. Already drilled a couple of dozen holes for the dowels in brick and concrete.

Of the chippers, so far only the walls in the bathroom and toilet (brick) and four through holes for the cable (antenna and Internet) in the concrete walls in the rooms have happened.

And he has yet to meet with the rest of the chippers: this summer we plan to capitalize on the entire apartment.

pros

Powerful, compact, good case, 3 modes of operation

Minuses

A little expensive

Term of use

half a year

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Gennady Potapov

Updated Interskol P-26 / 800ER-2 - a workhorse!

A comment

I have a special attitude to rotary hammers. I’ve been working with this type of tool for ten years now.I tried different models and different manufacturers. There is something to compare. Recently acquired a P-26 / 800ER-2 punch. I want to share some nice improvements in the design. First of all, I was pleased with the punch mode.
Whoever professionally drills holes in series, he will understand how sometimes you have to tap a tool in order to switch from idle to working mode. Especially when you are hanging on a stepladder and holding the perf with one hand, and he just spins and does not hammer. Just so many kind words are recalled. And at this perfo to start the impact, it does not need to be pressed strongly. With vertical drilling, the weight of the tool itself is sufficient. If the ceiling is drilled, then a hole can be marked on rotation, and then, with a light touch of a tool, add a beat to the rotation. This is especially true for monolithic floors. When drilling walls, you quickly get used to the effort at which the shock is connected. The tool is very responsive in punch mode.

The second pleasant moment was the tenacious button. It used to be a chronic disease of medium power rock drills. For the year had to change at least two buttons. So far, pah-pah-pah, there was not even a creep to the burning.

In general, a good affordable model of a professional tool.

pros

Price, power, good responsiveness in perforator mode, reliable button

Minuses

Not yet revealed

Term of use

half a year

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Artyom Nefedov

Powerful hammer drill with SDS-MAX

A comment

I work with this puncher for concrete, stone, brickwork. Often, crowns have to make holes for ventilation, socket boxes, and perform demolition work.
Powerful hammer drill with SDS-max, for heavy labor-intensive work.

They had to break out doorways, break down partitions, plaster, knock down tiles, lift the screed - it works like a chipper. Not for flimsy people, I tell you, a rather serious heavy machine, although it looks compactly tailored, but not everyone can hold it during long work.

I liked the opportunity to change the speed of the drill and the force of the impact, gradually increase or decrease if necessary. The safety clutch is also a good thing, more than once it saved my hands from pulling out when the drill accidentally jammed. He showed himself on the good side for continuous monotonous loads.

pros

Durable, powerful, quite compact for 8 J, metal inside, the barrel can withstand decent loads, two modes: rotation and bump, built-in ability to change the drill speed and impact force, elastic rubber cord

Minuses

Too heavy

Term of use

half a year

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Oleg

The puncher Interskol P-22 / 620ER met my expectations

A comment

This puncher has been working for me on installing doors for almost 2 years. I make them several dozen holes a day in different walls - concrete, monolith, expanded clay concrete, brickwork. Great working machine.
Like the box SDS plus automatic, instant change of the Boers, without unnecessary gestures. I buy consumables of only good quality, he does not like bullshit, bites.

It’s convenient for me, weight is suitable. It would be harder - it’s already inconvenient to keep weight above the level of the chest. As for me - the perfect value for money.
His native case is cramped, otherwise there are no complaints yet.

pros

Price, reliability, axle box SDS plus automatic, weight, power, impact energy

Minuses

There’s nothing to complain about, I wrote about the case that it’s too small

Term of use

more than three years

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Sergei

Puncher Interskol P-710ER - facilitates labor-intensive processes

A comment

Since repairing pleasure is expensive in itself, and the prices for building materials are constantly growing, we decided to redo the layout of the apartment ourselves. The question arose about acquiring our own hammer drill, and here, as always, the Internet is to help. I read an endless amount of comments and reviews, as I thought the purchase would be one of the most expensive, but I saw the praised model of the Interskol punch at a very attractive price.

Thanks to skillful marketers, my opinion of a cheap product is not the best. But he took a chance and bought it, because the deadlines were running out, it was necessary to start hammering the wall.
I liked the fact that the punch turned out to be quite light - about 3 kg. And the coating on the handles, not allowing the tool to slip when working without gloves.

Gouged the wall without any problems. Since I often smoke, the punch did not work for more than half an hour, I had to constantly rest. Then I read in the instructions that it is necessary to work like this, since the household tool is not designed for long-term operation, it must be turned off when heating.

In general, the unit justified my confidence in domestic manufacturers.

pros

long cord, reverse function, price, rugged case

Minuses

not detected

Term of use

half a year

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

A photo

Alexander

Interskol P-26 / 800ER - an excellent assistant for repair and construction works

A comment

For about three years now I have been engaged in private apartment renovation. Recently I decided to buy a new hammer drill. Following the advice of more experienced colleagues, I chose Interskol P-26 / 800ER. First of all, because the price was fine. Two times cheaper than the similar BOSCH model.
And also liked its versatility. But all this is only according to the description and reviews. I prefer to try first, then evaluate.
Three months have passed. I use a punch almost every day.

At high power (800 watts), the weight is only 2.9 kg. You can safely hold it with one hand, which is very convenient for working without assistants. Drilling concrete is so easy that even at first it seemed that it fell into the void. When I worked in a prefabricated house, I thought there would be problems, but here everything turned out fine. Yes, and the screwdriver is no longer needed, I also do this work with the help of a puncher. In general, I can now say that I am satisfied with the choice. For a small price received an excellent tool.

pros

low price, convenient, high power, long quality cord

Minuses

heats up quickly

Term of use

half a year

Recommendation to others

Recommend

Quality
4/5
Practicality
5/5
Price
5/5

Vladimir

Interskol P-24 / 700ER - inexpensive punch for repairing an apartment

A comment

A couple of years ago, he made repairs in the apartment, and without a punch there was nothing. After some deliberation, I decided to take Interskol P-24 / 700ER, and obviously was not mistaken in the choice. Of course, this is not an industrial model, but with home use it pays off at 100%. The model I bought was mainly designed for impact drilling, but I also used it for wall chipping

pros

My apartment is in a monolithic-brick house, the brick was ditched without problems, I had to give a break on concrete. As for drilling, I drilled 10 mm holes in concrete and worked with a crown for socket boxes. There were no stops at all, the punch was heated very little. There is a reverse on the button, so I used it as a screwdriver, my hand was a little tired (weight 2.7 kg), but this is a matter of habit.

Minuses

The disadvantages include the fact that the automatic clip holder sometimes sticks, but if you constantly lubricate the shanks of the nozzles, then there should be no problems. In my opinion, the case is rather fragile, so it worked carefully, without fanaticism.
For two years, I changed the brushes and the power cord, there were no more breakages.

Term of use

more than three years

Recommendation to others

Recommend