6 best chippers for concrete and brick

The rating of chippers for concrete, foam blocks, bricks and stone, based on customer and master reviews, will help you choose a tool with a long service life and high-quality even cut. The review takes into account the characteristics of the equipment, which is useful when selecting a wall chaser for specific tasks.

top chippers rating

Content:

  1. The best shtorezov with two working disks
  2. The best chippers with 3 and 5 working disks
  3. The best shtrobrez-furrow maker

The best shtorezov with two working disks

Tools of this category are produced with power from 1300 to 2500 W, which determines the speed of gating and the possibility of using materials of different densities. The following review of popular models with positive reviews will help you to find out which shtroborez is better for hidden pipe laying, thick cable and ordinary wiring.

 Makita SG 150 sEinhell TH MA 1300 sBosch GNF 65 A s
Makita SG 150 Einhell TH-MA 1300 Bosch GNF 65 A
 
 
Power, W 1800 1320 2400 
Weight, kg 5,6 4,8 8,4
Diameter of a disk, mm 150 125 230
Spindle speed, rpm 7800 9000 5000
Maximum depth of cut, mm 45 30 65
Maximum groove width, mm 35 26 40

Makita SG 150

One of the highest quality chippers from the Japanese brand. It has a power of 1800 W and an automatic system of protection against overheating. To adjust the width of the strobe, there are three rings of different thicknesses.

Makita SG 150

Makita SG 150 1m

Makita SG 150 2m

 

+ Pros Makita SG 150

  1. Robust powder-coated metal housing to cover the gearbox.
  2. Two wide rubber rollers for firm installation and guidance on the plane.
  3. P-shaped handle that helps hold the tool securely.
  4. There is a suitcase for transportation from object to object.
  5. The width of the groove varies from 7 to 45 mm with a depth of 45 mm.
  6. Disks with an average diameter of 150 mm are convenient for most tasks when repairing in an apartment.
  7. 7800 spindle speed per minute for faster operation.
  8. There is a soft start, so the cut starts exactly at the specified place without jerking.
  9. It is considered "unkillable" among professionals.

 

- Cons Makita SG 150

  1. The gearbox has five large slots for air cooling, through which dust is pulled inward.
  2. Cost is one of the highest in the category.
  3. Very heavy - hands weighing 5.6 kg quickly get tired with vertical strobing.
  4. No speed adjustment is provided.
  5. With very strong reinforced concrete, the revolutions can fall from the load, and the engine will overheat - interruptions in work will be required.
  6. There is no adapter for a vacuum cleaner.
  7. Comes without discs.
  8. If the rotor burns out, then the repair is very expensive, but this will not happen soon.
  9. When low-cost discs are used, jamming protection is constantly activated, and the original ones are not cheap.

Conclusion. The tool is perfect, due to the work with disks with a diameter of 150 mm and a maximum gating width of 45 mm, for laying a thick power cable throughout the apartment to the junction boxes. It is used for professional activities with everyday use and at large facilities due to its long life.

 

Einhell TH-MA 1300

Inexpensive chipper from a German brand, assembled in China. The power of the tool is 1320 watts, and it supports two discs with a diameter of 125 mm. Strobing is particularly fast due to the rotation of the spindle at a speed of 5000 rpm.

Einhell TH MA 1300

Einhell TH MA 1300 1m

Einhell TH MA 1300 2m

 

+ Pros Einhell TH-MA 1300

  1. The set already has two disks for work - you do not need to buy anything else.
  2. Comes in a beautiful case, convenient for transportation.
  3. The spindle can be locked during tool change.
  4. A good weight distribution with a central handle allows you to work with one hand, but there is a second handle to increase pressure.
  5. Keyless gating depth adjustment.
  6. Rubber pad on the handle prevents slipping.
  7. Conveniently located start key.

 

- Cons Einhell TH-MA 1300

  1. The width of the groove is not the largest and is 8-26 mm with a depth of 30 mm.
  2. No speed adjustment.
  3. Weight 4.8 kg gives a load on the hands - frequent breaks are required.
  4. Nothing else fits in the case - not even carrying.
  5. Through two slots in the gear housing, dust is sucked in.
  6. For some, the soft starter unit broke down, which led to the engine being turned off after reaching the maximum speed - repair costs 600 rubles.
  7. Short wire.

Conclusion. Budget chipper, well suited for self-repair in an apartment or semi-professional activity. Its advantage is the compact size of 385x220x265 mm. With this tool, it is especially convenient to bring cuts to the ceiling and ditch walls horizontally.

 

Bosch GNF 65 A

One of the most powerful chippers from a German company. 2.4 kW allow you to accelerate huge disks with a diameter of 230 mm to a speed of 5000 rpm. The equipment is able to cut a groove with a depth of 65 mm.

Bosch GNF 65 A

Bosch GNF 65 A 1m

Bosch GNF 65 A 2m

 

+ Pros of Bosch GNF 65 A

  1. Four-point support roller system.
  2. Adjustment of groove width from 3 to 40 mm.
  3. Does not slow down when colliding with strong concrete or stone.
  4. It is completed with a practical and strong suitcase.
  5. It starts without jerks due to the limited supply voltage at the beginning.
  6. A set of 10 washers for various modeling installation of cutting discs.
  7. The second handle is inserted on either side of the housing.
  8. The long nozzle to the vacuum cleaner does not require adapters.
  9. Adjustment of a protective disk without attraction of the additional tool.
  10. Silicate brick cuts through like oil.
  11. Long wire.

 

- Cons Bosch GNF 65 A

  1. Very heavy chippers (8.4 kg) - it is difficult to hold with both hands for a long time when working even on a horizontal plane, not to mention the vertical wall.
  2. Constantly pulls to the left side - if you work without marking, it is easy to deviate from the course and not notice it.
  3. After starting, it gains maximum speed and is not adjustable.
  4. There are small gaps in the casing through which dust flies out.
  5. One of the most expensive models.
  6. There are no marks on the case for alignment and control of the cut line.
  7. The pipe sticks out uncomfortably.

Conclusion. This model is included in the TOP chippers deservedly, because it leads in power, which is 2400 watts. The tool is best for making deep channels for communication in an apartment or house.

 
Which double-disc shredder you decided to buy?

The best chippers with 3 and 5 working disks

The presence of three to five discs on one shaft allows you to immediately cut through the furrow, as a result of which the remaining material either falls out of the strobe on its own, or due to the application of small efforts. This greatly speeds up the work and simplifies the process of bringing the channels to the finished state.

But the cut is slower because they have to cut a large area at a time. It is a professional tool for builders and repair companies to lay electrical and plumbing communications in large buildings.

 Metabo MFE 40 sMESSER T1455 s
Metabo MFE 40 MESSER T1455
 
 
Power, W 1900 2500
Weight, kg 4,6 8,5
Diameter of a disk, mm 125 150
Spindle speed, rpm 5000 8500
Maximum depth of cut, mm 40 42
Maximum groove width, mm 35 38

Metabo MFE 40

German wall chaser assembled at home. It is endowed with a power of 1900 W and a C-shaped second handle, which facilitates holding in various spatial positions. It is sold with one disc, but the manufacturer on its official website informs that the tool can work with three cutting elements.

Metabo MFE 40

Metabo MFE 40 1m

Metabo MFE 40 2m

 

+ Pros of Metabo MFE 40

  1. The support roller system contains four pivot points for better stability during gating.
  2. There is a limitation of starting currents for a gradual start of rotation - there is no jerk at all.
  3. Creates grooves with a width of 9 to 35 mm and a depth of up to 40 mm.
  4. Spindle speed 5000 rpm.
  5. It is assembled directly in Germany.
  6. Suitable for Bosch vacuum cleaners without any adapters.
  7. The depth of cut is conveniently adjusted with the handle on the left side.
  8. Cuts everything from concrete to silicate bricks.
  9. Electronics maintains constant speed regardless of the density of the material.
  10. There is protection against restart.

 

- Cons Metabo MFE 40

  1. The cost is high.
  2. It is completed with only one disk, and the second and third need to be bought independently.
  3. The speed is not adjustable.
  4. Hands weighing 4.6 kg quickly get tired.
  5. A large case with a length of 474 mm is inconvenient to rearrange and transport.
  6. The gearbox lets dust in - it needs periodic cleaning and lubrication.

Conclusion. This is a good shtroborez with three disks for quick wiring throughout the apartment, wiring channels to outlets, chandeliers. Power 1900 W is enough for cutting grooves in the walls of any materials. Maintaining constant revolutions will not lead to a drawdown in rotation when working with reinforced concrete.

 

MESSER T1455

Russian shtroborez going to Taiwan. It is equipped with a power of 2500 W and is able to spin the spindle to a speed of 8500 rpm. It is completed with a strong reinforced hose for a dust removal system.

MESSER T1455

MESSER T1455 1m

MESSER T1455 2m

 

+ Pros of MESSER T1455

  1. Reasonable price, much lower than famous brands, but the tool belongs to the category of professional.
  2. Comfortable rubber grip with ergonomic shape.
  3. Four rollers for better platform stability.
  4. Change the depth of gating with a screw on the right side of the housing.
  5. The rotation of the five discs at the same time completely selects the material between the borders of the strobe.
  6. You can install discs with a diameter of 125-150 mm.
  7. Cutting in width from 2 to 38 mm with a depth of up to 42 mm.
  8. There is a system for supplying water to the cutting zone to cool the discs and clean them.

 

- Cons MESSER T1455

  1. In addition to the chamfer and the hose, little will fit in the case.
  2. The speed of the discs is not regulated.
  3. Twitches at startup.
  4. Weight 8.5 kg - hands get tired after 5 minutes and need frequent breaks.
  5. Turnovers “float” under strong pressure and in a hurry - they often have to drive back to the sawn section with reciprocating movements.
  6. Only good wheels are needed.
  7. The water supply system helps and harms at the same time - the liquid, colliding with dust, turns into slurry and interferes.
  8. Hose for dust extraction as tight as from a fire hydrant.

Conclusion. This is a good replacement for well-known brands. The shtroborez is useful for electricians who have priority in the execution time of tasks. The presence of five disks allows you to immediately select the entire middle of the strobe and proceed to laying the cable.

 
What shtroborez with 3 and 5 working disks do you plan to buy?

The best shtrobrez-furrow maker

Shtroborez-furrow cutter is used when you need to quickly cut through the groove for laying a thin wire. The presence of one cutting element accelerates the process, but a thick cable cannot be inserted into the groove. In this case, you will need to perform a second slot, which will take twice as much time, and its evenness will turn out to be far from ideal.

Makita 4112HS

The furrower is assembled in Japan and the manufacturer endowed it with a capacity of 2400 watts. Designed to work with very large disks with a diameter of 305 mm.

Makita 4112HS

Makita 4112HS 1m

Makita 4112HS 2m

 

+ Pros Makita 4112HS

  1. It starts smoothly and is gradually gaining momentum.
  2. It is completed with a convenient suitcase and a wrench for untwisting of a shaft.
  3. Fast disk rotation at 5000 rpm.
  4. One of the largest depths of cut is 100 mm (they can even cut a small window in a brick partition).
  5. The wide start key is convenient for holding with all your fingers, and not just one that quickly gets tired.
  6. Double insulated insulation.

 

- Cons Makita 4112HS

  1. Weight over 10 kg greatly tires your hands.
  2. It does not support constant revolutions - the rotation speed depends on the density of the material.
  3. Another scheme of work (without rolling on the support rollers), but by the method of immersion of the saw blade, is therefore much slower than conventional chipper cutters.

Conclusion. This is a good shtroborez-furrower for laying low-current systems (telephone line, Internet, antenna cable, alarm). One disk will make a thin groove for the establishment of a wire of small cross section.

 

The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.


You will be interested
7 best network and battery pack renovators
10 best grinders (UShM) according to user reviews - rating, comparisons and a review of models
The 9 best grinders of various types for woodwork
How to choose an angle grinder (angle grinder)

Recommended reading:

Climate technology - articles and reviews