A comment
When repairing the toilet, the task was to choose a toilet, reading reviews and parameters for a long time, realizing that all manufacturers have jambs, they opted for a Santek Boreal toilet, anti-splash with a displaced hole in the center of the toilet =) Purchased for 4600r. Arriving home, I found that on the bottom of the tank, there are jambs of casting in the attachment points, I still did not understand a little, the recesses for the cone were made from the bottom of the tank, although the conical washers are installed from the inside.Having read about the through holes and the smell passing through them, I decided to carry out Hydraulic tests (as at work we carry out GI tanks) of the toilet cavities as soon as they brought home, you never know what to change.
1. Turned the toilet over, put it on a cardboard from the packaging and poured water to the maximum cavity connecting the waste outlet and the water into the toilet, connecting the partition for 30 minutes, 30 minutes have passed, draining the water all dry.
2. Putting the toilet in the normal position on the bridge of the bathroom (pre-laying sheets of paper on the bridge for leakage analysis), sealed the waste outlet from the toilet with bags + rubber bands + rope and poured a full toilet bowl under the seat to get the maximum column of liquid, respectively pressure.
After 2 hours, I drained the water, removed the toilet, everything is dry. (the only thing on the bottom of the toilet, in one place it was smeared as if trying to cover the seam, after the GI, this place was a little wet, but decided that it was just condensation from humidity). GI toilet successfully carried out. When I installed the toilet, all my relatives put in spare parts, but in order not to tempt fate, absolutely all the places of fasteners and gaskets were duplicated by sanitary sealant before the connection. The installation was done hastily, since after a couple of hours the guests were supposed to come, it was put into operation about an hour after the installation. all is successful, there are no leaks. We chose it precisely because I understood when choosing that the “anti-splash” since it should initially work due to the minimum water level in the place of the funnel and special design, is not guaranteed by one of the manufacturers. At our toilet, waste products fall onto the back wall and slide away, of course, if you don’t sit down so that the axis of the hole is 5 points and the funnel will coincide.
It’s almost always necessary to work with a brush, as the maximum water flows are directed on the sides to the front of the toilet, there’s a small stream on the back wall, BUT it doesn’t bother much, because before that there was a soviet toilet and they always worked like a brush, but 100% fun PLUSH is absent. Washes off well, the only thing that may not always be the first time to wash off cat's feline, as they are dry and have good buoyancy =), the paper is washed off well, but we usually throw it in a bucket, in order to clean the sewer. No flushing was noticed. The conclusion is oblique, we did not need any transitions, I just inserted it into the sewer plastic pipe and additionally missed it with sealant.
When choosing, pay attention to the output of the toilet, the main parameter for choosing the toilet, all sizes are usually on the diagrams and sites. There is fogging of the tank, but this does not depend on the toilet bowl but on the humidity in the apartment, in addition, I noticed that there are two recesses on the back of the toilet bowl lid, for ventilation in the tank, the result is a more rapid equalization of the temperature of the water in the tank and toilet room. When installed in a hurry, I dropped the corner cover of the seat of the Unisee, as the duroplast turned out to be fragile, later glued it back, smeared it with sealant.
pros
1 Price 4600r
2 The absence of holes that are not provided, the result is a lack of smell
3 Do not need extra. transitions for connection to the sewerage
4 No flushing
5 Washes off well and all
Minuses
1 Inessential jambs on toilet castings
2 Fragile Duroplast
3 Rarely water leaks, eliminated by repeated flushing
