Technical characteristics of insulation TechnoNIKOL and scope of their application
At that time, when a blizzard howls outside and a frost breaks out, I want the house to be comfortable and cozy. And if the apartment is warm and does not blow from any gap, you can enjoy watching the falling snow through the window. Optimum indoor temperature, lack of dryness, peace and quiet - which can be more pleasant in cold winters. But all this can be provided by Technonikol - heaters, the technical characteristics of which can solve all the problems of thermal insulation. This domestic material, produced by the company of the same name, has been enjoyed by many consumers.
Meet: Technonikol products
This company, today standing on a par with the largest European manufacturers (more precisely, one of the five largest of them), produces not only thermal insulation. She makes the following products.
Materials for roofing:
- Roof tile;
- roofing material;
- membranes made of polymeric materials;
- primers;
- mastics.
Insulation:
- Expanded polystyrene made by extrusion;
- mineral (basalt) wool, made in the form of plates.
Basalt Cotton Wool: Composition and Features
The finest stone fibers of this material consist of processed rocks of gabbro-basalt. Between these fibers contains a large number of air gaps. As a result, the level of thermal insulation of the material is simply excellent. It is no secret that it is air, being without movement, that has great resistance to heat transfer.
But this is not all the advantages of the insulation - it is good not only in the cold, but also with a critical increase in temperature. Very impressive is such a characteristic of TechnoNIKOL mineral wool as fire resistance. This material does not burn, quietly maintaining a temperature of even 1000 degrees Celsius. However, it does not even melt! Even if, unfortunately, a fire occurs, basalt cotton wool will protect your home, not allowing walls and ceilings to collapse. She will block the path to fire, in case of fire without emitting a drop of harmful substances.
- You can familiarize yourself with the characteristics of basalt cotton wool insulation in the article: Technical characteristics of basalt insulation, advantages, disadvantages and scope.
Extruded polystyrene foam TechnoNIKOL
This type of material is increasingly used for warming homes both here and abroad. After all, he holds heat very well. For example, to achieve an equivalent effect, you need to take a layer of wood 10 times thicker than expanded polystyrene (twenty centimeters versus two). So EPSP is cheaper. Yes, and it is much easier than other heaters, and this reduces the cost of transportation and facilitates installation. Strength and rigidity allow it to be used where softer heat insulators can not cope. But this material is afraid of fire - it not only burns, but also releases toxic substances. So you must comply with fire regulations, providing adequate protection.
Types of TechnoNIKOL materials and their technical characteristics
Basalt cotton wool Technonikol
1. Rocklight - is a plate of basalt fibers. A resin with a low phenol content is used as a binder. This increases the environmental friendliness of the material, which undoubtedly pleases the consumer. This insulation is non-combustible, moisture-proof, it stores wonderful heat. It is used for thermal insulation of private houses. It can be insulated with both horizontal and vertical or angled structures. For example, the walls of attics, frame houses sheathed with siding, floors and ceilings. Loads are not assumed to be very high.
2. Teploroll - These are long stone wool mats wound into rolls with good soundproofing properties. They also do not burn, do not get wet and have a low phenol content. They are good for insulating roof slopes, attic walls, floors between floors and floors. In addition to protection from the cold, they also provide good protection against noise.
3. Technoacoustic - as the name implies, it is designed specifically for soundproofing purposes. This is a non-combustible and moisture-resistant cotton wool made of basalt fibers arranged in a special way. Due to their location, the material is capable of retaining up to 60 decibels of noise. It is used for soundproofing partitions of frame-sheathing type, false ceilings and ceilings, on which large loads are not expected. And this insulation will be good both in the apartment, and in the house, and in the office room. And for the soundproofing of a club or restaurant, it is simply the perfect option.
Sound absorption class with the total thickness of the insulation layer:
- 50 mm - 212 NSV
- 100 mm - 211 NSV
- 150 mm - 211 NSV
- 200 mm - 111 NSV
4. Technoblock - It is a low-phenolic plate, which, like previous materials, are not afraid of fire and water, and also save from extraneous noise. They are used to preserve heat and absorb sounds in layered masonry, frame and siding walls.
Table of technical characteristics of basalt cotton wool Technonikol
| Parameters | Rocklight | Teploroll | Technoacoustic | Technoblock |
|---|---|---|---|---|
| Thermal conductivity at 10 0C, (W / m · C) | 0,039 | 0,036 | 0,035 | 0,035 |
| Vapor permeability, not less than mg / (m · h · Pa) | 0,3 | 0,3 | 0,3 | 0,3 |
| Water absorption by volume, no more (%) | 2,0 | 2,0 | 1,5 | 1,5 |
| Density (%) | 30-40 | 25-35 | 38-45 | 40-50 |
| Flammability (degree) | NG | NG | NG | NG |
| Compressibility, no more (%) | 30 | 55 | 10 | 8 |
Extruded polystyrene foam TechnoNIKOL
1. XPS TECHNONICOL CARBON ECO - a number of heaters intended for use in the construction of cottages and houses with a small number of floors.
2. XPS TECHNONICOL CARBON ECO DRAIN - expanded polystyrene plates having special drainage grooves. It is used to organize the drainage of the foundation, as well as the roof of a flat shape. In the latter case, the drainage grooves contribute to better ventilation. And with the isolation of the foundation, an outflow of rain and drainage water occurs along them.
3. XPS TECHNONICOL CARBON ECO FAS - use for arrangement of plastered facades and socles of houses. Outside, its boards are machined, so the material has excellent adhesion to any surface.
4. TECHNONICOL CARBON ECO SP - A unique material designed to isolate foundations made using a special technology called the “insulated Swedish plate”. Such a foundation also includes communications. It even includes a system for floor heating. Insulation ECO SP has increased stiffness, constant geometric dimensions and low thermal conductivity. The second such material in Russia is not released by any enterprise.
In addition to extruded polystyrene foam, intended for amateurs, the Technonikol company also produces professional heaters. These include the following materials:
1. CARBON PROF - heat insulator having high strength. At the same time, such a characteristic of a techno-nickel insulation of this type, as the density is reduced. Specialists usually work for them, insulating the roofs of shopping centers, transport and logistics and warehouse complexes, residential and office buildings.They are isolated roofs that are under stress, as well as all kinds of foundations and floors on the ground.
2. CARBON PROF SLOPE - differs from the previous material in that it is a whole set of five plates with which you can make an inclined surface. They have letters designating bias. Thus, slabs A and B have a slope of 1.7 percent, slabs J and K have a double slope (3.4 percent). And the slab M slope is 8.3 percent. Their thickness is 4, 8 and 7 centimeters.
3. Hard material CARBON SOLID - very durable due to the huge number of closed cells arranged evenly. They can isolate highways, railways, floors carrying heavy loads. XPS TECHNONICOL CARBON SOLID does not deform, does not swell from water (since it does not absorb it), does not rot and reacts to chemicals. Thermal insulation from it serves for a very long time, without being destroyed.
4. XPS boards TECHNONICOL CARBON SAND - Available specifically for insertion into the middle of insulating sandwich panels.
5. Extruded polystyrene foam in the form of plates TECHNONICOL C-XPS CARBON, It is used for repair and restoration of houses, as well as for insulation of floors made with a dry screed.
Table of technical characteristics of various varieties of TechnoNIKOL expanded polystyrene
| Stamps | Heat pipe. at (25 ± 5) 0С, W / (m * K) | Combustibility group | Vapor permeability, mg / (m.p. Pa) | Bending Strength MPa | Density kg / m3, not less | Operating temperature aboutFROM |
|---|---|---|---|---|---|---|
| CARBON ECO | 0,029 | G4 | 0,011 | 0,25 | 26-32 | from - 70 to + 75 |
| CARBON ECO SP | 0,029 | G4 | 0,011 | 0,30 | 26 - 32 | from - 70 to + 75 |
| CARBON ECO DRAIN | 0,029 | G4 | 0,011 | 0,25 | 26 - 32 | from - 70 to + 75 |
| CARBON ECO FAS | 0,029 | G4 | 0,011 | 0,25 | 26 - 32 | from - 70 to + 75 |
| CARBON PROF | 0,028 | G4 - G3 | 0,010 | 0,35 - 0,40 | 28 - 36 (varies by species) | from - 70 to + 75 |
| CARBON PROF SLOPE | 0,028 | G3 | - | - | 28 | from - 70 to + 75 |
| CARBON SOLID | 0,031 - 0,035 | G4 | 0,005 | 0,7 | 36 - 60 (depending on variety) | from - 70 to + 75 |
| CARBON SAND | 0,030 | G3 / G4 | 0,010 | 0,30 - 0,70 | 28 | from - 70 to +75 |
| C-XPS CARBON | 0,0332 / 0,0337 / 0,0344 / 0,0345 | G1 | 0,01 | 1 | - | from - 70 to + 75 |
