A comment
Dual feelings after purchasing and laying Brilliant B002 12mm laminate.
In general, the verdict is such if there are no differences between the dies and they are joined with minimal gaps, the laminate should withstand 15-20 years as stated by the Chinese manufacturer
pros
One significant plus. I decided to conduct an experiment, tapped the center of the die with a hammer ... I was unexpectedly surprised by the resistance to shock. A hammer falling edge from a meter height of five falls leaves no traces at all. My wife danced in stilettos for about five minutes and everything is ok too.
Minuses
Cons: the picture with the same labeling of boxes B 002, different, does not always fit together, respectively, if customized, there are a lot of residues. Those dies that fit well in the drawing (with a different type of drawing) sit in the grooves tightly and not quite evenly, they have to be customized for a long time (56 square meters were made with the master for three days, 36 packages were left, 1.75 square meters in the package. ) Separate dies (4-5 pcs.) When docking were higher in level, had to be cleaned in places where there will be furniture. But the most unpleasant thing is chips ... (in packaged packages).I would not say that there are a lot of them (from a batch of 10-14 dice, they went to trim), but you need to be careful and follow the master so that he doesn’t put them on the machine.
Not a strong place and edge. If it is gently knocked down with a similar die with a lock, it basically holds on, but if something went wrong and you have to remove the bar, the edge starts to crumble. if a piece breaks off, it is practically not noticeable on the corrugated texture of the laminate. I came across several dies with a strong influx of wax on the lock (factory marriage), if you do not notice, the wax interferes with the docking (it is easily cleaned).